GSM signal amplifier - 2000 sq.m. (ID: R03)
With this GSM signal booster you can cover a large area with a strong and high quality signal of mobile services. It can effectively cover 2 000 square meters. It is suitable for large hotels, office and residential buildings increasing the signal strength and thus prolonging the operation time of the mobile phones and reduces harmful emissions from them. Its installation requires no special skills and knowledge. You have to attach the reception and emission antennas, plug the power cord and this amplifier is ready to use.
Specifications:
Frequency
Uplink 890-915MHz Downlink 935-960MHz
Gain (dB):
Uplink Gp ≥ 65 Downlink Gp ≥ 70
utput power (Po):
≥ 27dBm
Impedance:
50 Ohm / N connector
Delay:
≤ 0.5 microseconds
Temperature:
-10 ℃ ~ 60 ℃
Power:
AC110 ~ 220V 45 ~ 55Hz
Dimensions:
220x140x40 mm
Specifications:
Frequency
Uplink 890-915MHz Downlink 935-960MHz
Gain (dB):
Uplink Gp ≥ 65 Downlink Gp ≥ 70
utput power (Po):
≥ 27dBm
Impedance:
50 Ohm / N connector
Delay:
≤ 0.5 microseconds
Temperature:
-10 ℃ ~ 60 ℃
Power:
AC110 ~ 220V 45 ~ 55Hz
Dimensions:
220x140x40 mm
GSM signal amplifier - 2000 sq.m.
video GSM signal amplifier - 2000 sq.m.
Installation:
1. Install firmly the receiving antenna on the roof and direct it towards the cell service provider.
2. Connect the receiving antenna to the input of the amplifier (OUTDOR) using a 50 ohm cable and N-connectors.
3. Connect the transmitting antenna to the output of the repeater (INDOR) over cable and N- connectors.
4. With micro switches located at the input and output you can adjust the levels of the input and output signal for maximum reception quality.
5. Plug power adapter into the power socket on the repeater and that's all - the installation is complete.
Settings:
1. If you do not receive any signal after installation check if the receiving antenna is directed to the cell of the operator and whether the place in which is placed has poor signal from the mobile operator.
2. If you can not make an outgoing call check the correct aiming of the receiving antenna.
3. If the signal is not stable verify that the transmit and receive antennas are not too close to each other. They must be like over 10-15 meters away and a wall between them. Also they must not to be in a horizontal line.
GSM signal amplifier - 2000 sq.m. (ID: R03)